进口LYNX Series系列API接头LYNX852

进口LYNX Series系列API接头LYNX852


LYNX Series Bottom-Loading Coupler

Not Just Better In Every Way. The Best In Every Way.
LYNX – Bottom-Loading Coupler for Liquid Terminals, Tank Trucks
不是所有方面都好。各方面都是*好的。
Lynx–液体终端、油罐车的底部装载连接器
 
Lynx系列底部加载耦合器代表了OPW工程系统的新时代。我们已经完全重新想象了API干裂连接器可以是什么。轻松操控。先进的安全功能。*小的泄漏。也许*令人印象深刻的是：由于采用了革命性的U型销设计，整个车钩的拆卸非常迅速和容易。
The LYNX Series bottom-loading couplers represent a new era from OPW Engineered Systems. We’ve completely reimagined what an API dry-break coupler can be. Effortless handling. Advanced safety features.Minimal leakage. And perhaps most impressive: incredibly quick and easy disassembly of the entire coupler thanks to a revolutionary U-pin design.


Lynx系列车钩-底部装载*佳
LYNX Series Coupler – The Best in Bottom Loading


Lynx经过优化，使您的液体终端和油罐车在干裂原料药技术方面表现*佳。从其超耐用的不锈钢轴环到其保护装卸臂连接的能力，即使面对高达500 psi的冲击压力，您也可以依靠Lynx多年的服务，并帮助*大限度地减少液体损失。LYNX is optimized to bring your liquid terminals and tank trucks the very best in dry-break API technology. From its ultra-durable stainless-steel collar to its ability to protect your loading-arm connection even when facing surge pressures up to 500 psi, you can count on LYNX for years of service and to help minimize fluid loss.



Fast Disassembly, Less Downtime
快速拆卸，减少停机时间

如果你有30秒的时间和螺丝刀，你可以拆卸Lynx。由于采用了U形销设计，装卸臂操作人员无需专用工具即可进行车钩维护，并能快速完成。If you have 30 seconds and a screwdriver, you can disassemble LYNX. Thanks to a U-pin design, loading-arm operators can perform coupler maintenance without special tools and do it quickly.

Specifications

Handle Length	Short 5.9" (150mm) or Long 7.8" (200mm)
Seals	Viton B, Viton GFLT, Nitrile/Buna, Fluorosilicone, FFKM, Ultra Low-Temp (FKM)
Max Working Pressure	80 psi (5.5 bar) (550 kPa)
Product Test Pressure	119 psi (8.2 bar) (820 kPa)
Design Pressure	363 psi (25 bar) (2500 kPa)
Max Surge Pressure	493 psi (34 bar) (3400 kPa)
Operating Temperature	Viton B70: 0°F to 200°F (-15°C to +90°C); Viton GFLT: -20°F to +200°F (-28°C to +90°C); Nitrile/Buna: -40°F to 212°F (-40°C to 100°C); Fluorosilicone: -49°F to 350°F (-45°C to 177°C); FFKM: 23°F to 140°F (-5°C to 60°C); FKM (Ultra Low-Temp): -40°F to 200°F (-40°C to 90°C)
Design Standard	API RP 1004 8th EDITION 2003 - Bottom Loading and Vapour Recovery; AS5602-2009
Dismantling	Removal of one U-pin enables the shaft assembly and main poppet to be withdrawn
Mounting	• By industry standard 4" (100 mm) TTMA Flange • 8 holes Ø7/16" on 5.8" PCD, 6.6" outside diameter (Ø11 mm on 149 mm PCD, 168 mm OD) • Use spring washers when mounting coupler as per common industry practice
Adjustment or Service	Refer to Maintenance Instructions document
Weight	19 lbs. (8.6 kg.)

Viton® is a registered trademark of DuPont

5-Year Warranty
Fast in-field replacement of the main seals, on or off the arm
Quick and easy disassembly of entire coupler through U-pin design
Automatic latching
U-pin is secured when the TTMA flange is fastened to prevent the pin from coming out during service
A variety of seals available to suit a range of applications
Two operating handle sizes to suit customer preference
Four “true-interlocking” stainless-steel latches ensure secure coupling and maximum safety
High-quality components including a stainless-steel collar and hard anodized aluminum body for increased service durability and life
Nominal product leakage during disconnect increases site safety
Low risk of leakage because of a proven seal design
Ergonomic operating handle and carry loop results in less physical strain on users

  NOT JUST BETTER IN EVERY WAY.
THE BEST IN EVERY WAY.


NOTE: All information subject to engineering and/or other changes. All trade names are copyrighted. Patents Pending. 2016 OPW Engineered Systems.2016 Delaware Capital Formation, Inc. All Rights Reserved. DOVER and the DOVER logo are registered trademarks of Delaware Capital Formation, Inc.,a wholly-owned subsidiary of Dover Corporation.



EASY TO USE, EASY TO MAINTAIN, WITH A
WARRANTY THAT MAKES IT EASY TO LOVE.



ORDERING
LYNX852 Long Handle*, Viton B70
LYNX852VG Long Handle*, Viton GFLT
LYNX852B Long Handle*, Nitrile/Buna
LYNX852F Long Handle*, Fluorosilicone
LYNX852ULT Long Handle*, Ultra Low-Temp (FKM)


* Also Available with Short Handle.
Better Sealing
New Seal Design = Less Drippage
Wave Spring
3x More Life!
Handle Shaft
Significantly Stronger
Stainless-Steel Collar
Durability for Life
Links/Camplates
Added Strength
4 True-Interlocking
Latches
Max Surge Pressure of 500 psi
Unique U-pin
design enables disassembly of
the coupler in 30 seconds.
EXCLUSIVE
LYNX850 SS 
 12/2016


SPECIFICATIONS
Max Working Pressure: 80 psi
Test Pressure: 120 psi
Max Surge Pressure: 500 psi
Operating Temp: -49°F to 200°F (-45°C to +93°C)*
Design Standard: API RP 1004 8th Edition
Weight: 19 lbs.
Distributed by: *Operating temp. rating will vary based on seal selection



Downloads
 LYNX Series Bottom-Loading Coupler Sell Sheet
 LYNX Series Bottom-Loading Coupler Data Sheet
 LYNX Series Bottom-Loading Coupler Installation Operations Manual
 Folleto Soluciones Totales Para Terminales (En Español)
 Especificaciones y Partes Acople LYNX (En Español)
 Folleto Acople LYNX (En Español)
 Terminal Solutions Brochure