• 美国德纳科Dynalco SPD-108 Tachometer转速表

    详细信息

     品牌:Dynalco  型号:SPD-108  加工定制:否  
     适用范围:交通运输,发电,船舶,采矿,水    
    美国德纳科Dynalco SPD-108 Tachometer转速表

    Download Info:
    SPD-100 Data Sheet
    SPD-108 Manual
    SPD-108 Agency Approval (CSA)
    SPD-108 Agency Approval (ABS)
    Product Code: SPD-108

    转速表:信号供电,4位,本质安全,无灯显示,半门时间范围SPD-100
    TACHOMETER: signal-powered, 4- digit, instrinsically safe, unlighted display, ½ gate time range of SPD-100

    SPD-108是一种固态本安型转速表,具有现场可编程的门时间范围(0.13至2.85秒)。它密封性好,适用于坚固的室内和室外应用。它有4位,无灯,液晶显示。CSA和ABS型式认证。
    The SPD-108 is a solid- state, intrinsically safe tachometer with a gate time range (0.13 to 2.85 sec) that is field- programmable. It is well- sealed for rugged indoor and outdoor applications. It has 4-digit, unlighted, LCD display. CSA and ABS Type approved.

    SPD-108
    Signal-Powered
    Digital
    Tachometer


    FEATURES
    - Signal and power derived totally from
    magnetic pickup or pulser.
    - Intrinsically safe. Can be used in hazardous
    environments with approved Dynalco
    pickups. (See THIRD PARTY APPROVALS,
    next page.)
    - No power supply connections. High immunity
    to electrical noise.
    - Can be field-calibrated.
    - High accuracy: 1 rpm resolution.
    - High shock and vibration resistance.
    - Standard SAE case size fits panels with
    3-3/8 inch (86 mm) openings.
    - Gasketed and spray-proof.
    - Ideal for OEM use.
    - Can be paralleled with governors and/or
    speed switches.
    - Can share existing pickups or pulsers; draws
    only microamperes.
    - Ground-free terminals have no polarity; easy
    installation.

    SPECIFICATIONS
    External Power Requirements:
    All models are signal-powered. Lighted
    versions: 12 or 24 Vdc, depending on model.
    Display:
    Four active digits (0 to 9999), non-blinking
    LCD display; character height of 0.5 inches
    (14 mm). Display contrast increases with
    increasing ambient light.
    Input Valve Voltage:
    From pickups, pulsers, shaft encoders, etc.
    􀂋 Minimum signal amplitude: 2.5 Vrms.
    􀂋 Maximum permissible signal: 15 Vrms.
    The SPD-100 automatically limits pickup
    signals at approximately 10 volts peak-topeak.
    Input impedance is 100 Ω in series
    with a 6 volt Zener diode.
    Input Signal Frequency:
    Maximum input signal frequency of 20,000
    Hz. Lowest frequency range limited by gate
    time and corresponding numerical display.
    Isolated Circuit:
    All circuitry is totally floating, i.e. totally isolated
    and insulated from the case and from ground.
    Operating Temperature Range:
    –5oF to +175oF (–20oC to +80oC).
    Storage:
    –40oF to +195oF (–40oC to +90oC).
    Vibration: MIL STD 810C; Method 514.2;
    Curve Q; Procedure V; Modified to 500 Hz
    upper limit. 5 Hz to 10 Hz @ 0.2 inches
    D.A.; 10 Hz to 18 Hz @ 1.0 g (peak); 18 Hz
    to 57 Hz @ 0.06 inches D.A.; 57 Hz to 500
    Hz @ 10 g (peak).
    Accuracy:
    One rpm resolution; within 0.5% (0.1% typical
    at room ambient) under all combined
    environmental conditions.
    Gate Time Ranges:
    SPD-100 Series : field-selectable from 0.26
    to 5.7 seconds.
    SPD-108 Series: field-selectable from 0.13
    to 2.85 seconds.
    This accommodates calibrations for an
    extremely broad range of corresponding
    pulses per second.
    Magnetic Pickups:
    Dynalco Magnetic Pickups M102 and
    M107 are used with the SPD-100 Series in
    most applications. Refer to Dynalco
    Magnetic Pickup brochure for various types
    and characteristics.
    For low-speed applications, or to permit
    operation with larger gaps, the ultrahigh
    sensitivity M142 can be used.
    For intrinsically safe applications Dynalco
    Controls offers various models, with the M202
    and M134 the most frequently used.
    Weight: 1 lb (0.45 kg)

    美国德纳科Dynalco控制仪表公司简介

    美国德纳科Dynalco公司设计和制造高度工程坚固,可靠的,第三方的监测,控制和往复式发动机,蒸汽涡轮机,燃气涡轮机,泵和输送系统的保护认证仪表。我们为一个在石油和天然气,化工/过程,建筑业及越野设备,交通运输,发电,船舶,采矿,水和废水市场的客户和工厂自动化等。Dynalco designs and manufactures highly engineered rugged, reliable, 3rd party certified instumentation for monitoring, control and protection of reciprocating engines, steam turbines, gas turbines, pumps and conveying systems. We serve a variety of customers in the Oil and Gas, Chemical/Process, Contruction and off-road equipment, Transportation, Power Generation, Marine, Mining, Water and Waste Water and Factory Automation Markets. 

    Dynalco 1968年创立,有三种产品,以及为石油和天然气工业生产工程解决方案的目标。自那以后的47年里,Dynalco已经成为世界范围内的工业领袖,因其在石油和天然气、化学、电力、海洋和建筑行业使用的高质量的仪器和控制而得到认可。Dynalco was started in 1968, with three products and a goal of producing engineered solutions for the oil and gas industries. In the 47 years since, Dynalco has become a worldwide industry leader, recognized for its high-quality instruments and controls used in the oil & gas, chemical, power, marine and construction industries.

     

    - Dynalco Products

    MTH-103E Tachometer / Hourmeter / Overspeed Trip 
    UM-200 Tachometer / Hourmeter / Monitor 
    Catalyst Monitor 
    UM-600 Universal MonitorInstruments & Controls for Rotating Equipment in 
    Demanding Applications 
    Recently Updated Products M928-24 Magnetic Pickup/Speed Sensor 
    MTH-103D Tachometer / Hourmeter / Overspeed Trip 
    SST-2400H Speed Switch/Transmitter 
    SWTD-1000 Speed Switch/Transmitter
    LMD-120A Panel Meter 
    LMD-120D Panel Meter
    DPM-105 Panel Meter 
    UM-600 Universal Monitor

    Engine Controls & Emissions Controls 
    Instruments/Gauges/Meters 
    - General Purpose Gauges/Meters 
    - Hourmeters 
    - Tachometers 
    - Temperature Gauges/Meters 
    - Universal Scanner Magnetic Pickups/Speed Sensors 
    - Active (Powered) 
    - Cable Assemblies 
    - Extra Long Reach 
    - Hazardous Area 
    - Intrinsically Safe Barriers 
    - Miniature 
    - Power Source 
    - Standard Power Generation 
    Dynalco Speed Switches & Speed Transmitters 
    - DIN Rail and DIN Standard Series 
    - SST Series

    - Dynalco Tachometer转速表

    Dynalco Tachometers转速表型号

    CRT-9x - Replacement Tachometers;The CRT-9X replaces Caterpillar tachometers: CAT-9X114, CAT-9X116, and CAT-9X117. SPD-100 ; SPD-100L ; SPD-108 ; SPD-108L; MTH-103D; F-16; DS-800; DS-900; SPD-700; SPD-708; LST-100; LST-100L; LST-108; LST-100; LST-108L; DST-2000C; PG-100; TT-1; TT-100;DPM-105,LMD-120A,LMD-120,LMD-120D,G-101。

    Dynalco Speed Switch 速度开关型号

    SST-2000A;SST-2000H ;SST-2000A/H;SST-2200A;SST-2400A;SST-2200H;SST-2400H;SW-200B;SW-50;PNT-202

    DYNALCO SST-2000 Series Speed Switches/ Transmitters Product
    SST-2000A Speed Transmitter
    SST-2000H Speed Transmitter
    SST-2200A Speed Switch/Transmitter
    SST-2200H Speed Switch/Transmitter
    SST-2400A Speed Switch/Transmitter
    SST-2400H Speed Switch/Transmitter

    Dynalco Pickup Sensor传感器型号

    M104; M202; M208,M101 ,M102 ,M131,M133 ,M142 ,M151 ,M155 ,M168 ,M183 ,M184,M189 ,M343 ,M801 ,M802 ,M928 ,M137 ,M138 ,M143 ,M104,M134 ,M135 ,M139, M140,M180 Magnetic Pickup/Speed Sensor ,M201 ,M202 ,M203 ,M204 Magnetic Pickup Speed Sensor,M205 ,M219 ,M231 ,M233,M318 ,M319 Magnetic Pickup/Speed Sensor,M107 ,M207 ,M208 ,C101-10 ,C910-10 ,C917-10 ,HTM-801; M806 Hall Effect Magnetic Pickup/Speed Sensor ; M951 Hall Effect Magnetic Pickup/Speed Sensor 。 Dynalco temperature indicator温度指示仪型号:TMP-100 ; STM-110-11;STM-110-13 ; STM-110-14 ; TID-110; TMP-900。
  • 留言

    *详细需求:
    *手  机:
    联 系 人:
    电    话:
    E-mail:
    公  司:
    谷瀑服务条款》《隐私政策
信德迈科技(北京)有限公司 电话:010-84282935 手机:13910122694 地址: 北京朝阳区望京街10号望京SOHO-T1-C座2115室
内容声明:谷瀑为第三方平台及互联网信息服务提供者,谷瀑(含网站、客户端等)所展示的商品/服务的标题、价格、详情等信息内容系由店铺经营者发布,其真实性、准确性和合法性均由店铺经营者负责。谷瀑提醒您购买商品/服务前注意谨慎核实,如您对商品/服务的标题、价格、详情等任何信息有任何疑问的,请在购买前通过谷瀑与店铺经营者沟通确认;谷瀑上存在海量店铺,如您发现店铺内有任何违法/侵权信息,请在谷瀑首页底栏投诉通道进行投诉。