美国德纳科Dynalco SPD-100 Tachometer转速表

美国德纳科Dynalco SPD-100 Tachometer转速表

Download Info:
SPD-100 Data Sheet
SPD-100 Manual
SPD-100 Agency Approval (CSA)
SPD-100 Agency Approval (ABS) Product Code: SPD-100

转速表：信号供电，4位，本质安全，无灯显示TACHOMETER: signal-powered, 4- digit, intrinsically safe, unlighted display
SPD-100是一种固态本质安全转速表。门时间范围（0.26至5.70秒）可现场编程。它密封性好，适用于坚固的室内和室外应用。它有4位，无灯，液晶显示。CSA和ABS型式认证。
The SPD-100 is a solid- state, intrinsically safe tachometer. The gate time range (0.26 to 5.70 seconds) is field- programmable. It is well- sealed for rugged indoor and outdoor applications. It has 4-digit, unlighted, LCD display. CSA and ABS Type approved.

SPD-100
Signal-Powered
Digital
Tachometer


FEATURES
- Signal and power derived totally from
magnetic pickup or pulser.
- Intrinsically safe. Can be used in hazardous
environments with approved Dynalco
pickups. (See THIRD PARTY APPROVALS,
next page.)
- No power supply connections. High immunity
to electrical noise.
- Can be field-calibrated.
- High accuracy: 1 rpm resolution.
- High shock and vibration resistance.
- Standard SAE case size fits panels with
3-3/8 inch (86 mm) openings.
- Gasketed and spray-proof.
- Ideal for OEM use.
- Can be paralleled with governors and/or
speed switches.
- Can share existing pickups or pulsers; draws
only microamperes.
- Ground-free terminals have no polarity; easy
installation.

SPECIFICATIONS
External Power Requirements:
All models are signal-powered. Lighted
versions: 12 or 24 Vdc, depending on model.
Display:
Four active digits (0 to 9999), non-blinking
LCD display; character height of 0.5 inches
(14 mm). Display contrast increases with
increasing ambient light.
Input Valve Voltage:
From pickups, pulsers, shaft encoders, etc.
􀂋 Minimum signal amplitude: 2.5 Vrms.
􀂋 Maximum permissible signal: 15 Vrms.
The SPD-100 automatically limits pickup
signals at approximately 10 volts peak-topeak.
Input impedance is 100 Ω in series
with a 6 volt Zener diode.
Input Signal Frequency:
Maximum input signal frequency of 20,000
Hz. Lowest frequency range limited by gate
time and corresponding numerical display.
Isolated Circuit:
All circuitry is totally floating, i.e. totally isolated
and insulated from the case and from ground.
Operating Temperature Range:
–5oF to +175oF (–20oC to +80oC).
Storage:
–40oF to +195oF (–40oC to +90oC).
Vibration: MIL STD 810C; Method 514.2;
Curve Q; Procedure V; Modified to 500 Hz
upper limit. 5 Hz to 10 Hz @ 0.2 inches
D.A.; 10 Hz to 18 Hz @ 1.0 g (peak); 18 Hz
to 57 Hz @ 0.06 inches D.A.; 57 Hz to 500
Hz @ 10 g (peak).
Accuracy:
One rpm resolution; within 0.5% (0.1% typical
at room ambient) under all combined
environmental conditions.
Gate Time Ranges:
SPD-100 Series : field-selectable from 0.26
to 5.7 seconds.
SPD-108 Series: field-selectable from 0.13
to 2.85 seconds.
This accommodates calibrations for an
extremely broad range of corresponding
pulses per second.
Magnetic Pickups:
Dynalco Magnetic Pickups M102 and
M107 are used with the SPD-100 Series in
most applications. Refer to Dynalco
Magnetic Pickup brochure for various types
and characteristics.
For low-speed applications, or to permit
operation with larger gaps, the ultrahigh
sensitivity M142 can be used.
For intrinsically safe applications Dynalco
Controls offers various models, with the M202
and M134 the most frequently used.
Weight: 1 lb (0.45 kg)

美国德纳科Dynalco控制仪表公司简介

美国德纳科Dynalco公司设计和制造高度工程坚固，可靠的，第三方的监测，控制和往复式发动机，蒸汽涡轮机，燃气涡轮机，泵和输送系统的保护认证仪表。我们为一个在石油和天然气，化工/过程，建筑业及越野设备，交通运输，发电，船舶，采矿，水和废水市场的客户和工厂自动化等。Dynalco designs and manufactures highly engineered rugged, reliable, 3rd party certified instumentation for monitoring, control and protection of reciprocating engines, steam turbines, gas turbines, pumps and conveying systems. We serve a variety of customers in the Oil and Gas, Chemical/Process, Contruction and off-road equipment, Transportation, Power Generation, Marine, Mining, Water and Waste Water and Factory Automation Markets. 

Dynalco 1968年创立，有三种产品，以及为石油和天然气工业生产工程解决方案的目标。自那以后的47年里，Dynalco已经成为世界范围内的工业领袖，因其在石油和天然气、化学、电力、海洋和建筑行业使用的高质量的仪器和控制而得到认可。Dynalco was started in 1968, with three products and a goal of producing engineered solutions for the oil and gas industries. In the 47 years since, Dynalco has become a worldwide industry leader, recognized for its high-quality instruments and controls used in the oil & gas, chemical, power, marine and construction industries.

 

- Dynalco Products

MTH-103E Tachometer / Hourmeter / Overspeed Trip 
UM-200 Tachometer / Hourmeter / Monitor 
Catalyst Monitor 
UM-600 Universal MonitorInstruments & Controls for Rotating Equipment in 
Demanding Applications 
Recently Updated Products M928-24 Magnetic Pickup/Speed Sensor 
MTH-103D Tachometer / Hourmeter / Overspeed Trip 
SST-2400H Speed Switch/Transmitter 
SWTD-1000 Speed Switch/Transmitter
LMD-120A Panel Meter 
LMD-120D Panel Meter
DPM-105 Panel Meter 
UM-600 Universal Monitor

Engine Controls & Emissions Controls 
Instruments/Gauges/Meters 
- General Purpose Gauges/Meters 
- Hourmeters 
- Tachometers 
- Temperature Gauges/Meters 
- Universal Scanner Magnetic Pickups/Speed Sensors 
- Active (Powered) 
- Cable Assemblies 
- Extra Long Reach 
- Hazardous Area 
- Intrinsically Safe Barriers 
- Miniature 
- Power Source 
- Standard Power Generation 
Dynalco Speed Switches & Speed Transmitters 
- DIN Rail and DIN Standard Series 
- SST Series

- Dynalco Tachometer转速表

Dynalco Tachometers转速表型号

CRT-9x - Replacement Tachometers;The CRT-9X replaces Caterpillar tachometers: CAT-9X114, CAT-9X116, and CAT-9X117. SPD-100 ; SPD-100L ; SPD-108 ; SPD-108L; MTH-103D; F-16; DS-800; DS-900; SPD-700; SPD-708; LST-100; LST-100L; LST-108; LST-100; LST-108L; DST-2000C; PG-100; TT-1; TT-100；DPM-105，LMD-120A，LMD-120，LMD-120D，G-101。

Dynalco Speed Switch 速度开关型号

SST-2000A；SST-2000H ；SST-2000A/H；SST-2200A；SST-2400A；SST-2200H；SST-2400H；SW-200B；SW-50；PNT-202

DYNALCO SST-2000 Series Speed Switches/ Transmitters Product
SST-2000A Speed Transmitter
SST-2000H Speed Transmitter
SST-2200A Speed Switch/Transmitter
SST-2200H Speed Switch/Transmitter
SST-2400A Speed Switch/Transmitter
SST-2400H Speed Switch/Transmitter

Dynalco Pickup Sensor传感器型号

M104; M202; M208，M101 ，M102 ，M131，M133 ，M142 ，M151 ，M155 ，M168 ，M183 ，M184，M189 ，M343 ，M801 ，M802 ，M928 ，M137 ，M138 ，M143 ，M104，M134 ，M135 ，M139， M140，M180 Magnetic Pickup/Speed Sensor ，M201 ，M202 ，M203 ，M204 Magnetic Pickup Speed Sensor，M205 ，M219 ，M231 ，M233，M318 ，M319 Magnetic Pickup/Speed Sensor，M107 ，M207 ，M208 ，C101-10 ，C910-10 ，C917-10 ，HTM-801； M806 Hall Effect Magnetic Pickup/Speed Sensor ; M951 Hall Effect Magnetic Pickup/Speed Sensor 。 Dynalco temperature indicator温度指示仪型号:TMP-100 ; STM-110-11；STM-110-13 ; STM-110-14 ; TID-110; TMP-900。