美国Dynalco Catalyst Monitor 催化剂监控器

美国Dynalco Catalyst Monitor 催化剂监控器

Product Code: Catalyst Monitor

Description：
我们的催化剂监测器满足水稻NESHAP连续参数监测的要求。这是一个低成本的解决方案，预先配置，是快速和容易安装和运行。CSA批准。
Catalyst Monitor是一个专门为您提供低成本即插即用的催化剂监控解决方案的产品。它监测催化剂的输入温度，计算和存储4小时滚动平均每米NESHAP的要求;不符合规定时报警。它还可以监测整个催化剂的压降、发动机转速和运行时间。它也有船上的数据记录，可以通过Modbus连接或USB接口访问。
Our Catalyst Monitor meets the RICE NESHAP Continuous Parameter Monitoring requirements. It is a low cost solution that comes pre-configured and is quick and easy to install and get running. CSA approved.
The Catalyst Monitor is a purpose built product that provides you with a low cost plug and play solution for monitoring your catalyst. It monitors catalyst input temperature and calculates and stores the 4-hour rolling average per RICE NESHAP requirements; alarming when out of compliance. It also monitors the pressure drop across the catalyst, engine speed and run hours. It also has on board data logging that can be accessed via a Modbus connection or a USB interface.
 
Catalyst Monitor
Product Data Sheet January 2012 Instrumentation & Controls
6 Channel Monitor / Data Logger
Designed for catalyst monitoring and data logging on Spark Ignited and Diesel engines.
• NSCR (3-way) & Oxidation (2-way) type catalysts
The following parameters are monitored:
• Catalyst Inlet / Outlet Temperatures plus Differential
• Catalyst Inlet / Outlet Pressures plus Differential
• Left Bank / Right Bank O2 Sensor Outputs for ensuring proper  AFRC operation
• Engine Hours (5-digit non-resettable)
• Engine Speed
• Can be configured to alarm if inlet temperature out of compliance
• On-Board Data Logging of thousands of values with time / date stamp
• Modbus RS-485 Communications Protocol for communications w/ SCADA or DCS
• CSA Class I, Division 2 Groups A, B, C & D approved
Monitors catalyst inlet temperature based on 4 hour rolling average per RICE NESHAP requirements – data is saved to non-volatile flash memory
SPECIFICATIONS

Electrical:
Supply Voltage: 10 – 36 VDC
Input Types: J, K type thermocouple 4 – 20 mA 0 – 1 VDC 0 – 5 VDC 0 – 10 VDC
Plus (1) pulsed input for RPM display
Output Type: (2) digital outputs rated 0.15 A @ 48 VDC
Scan Rate: All channels scanned in 100 milli-seconds
Accuracy: 0.2%
Mechanical:
¼ DIN package (3 ½” width X 3 ½” height) for panel mount
Splash-proof front panel
Removable connectors on back of enclosure
• Fully programmable from front keypad
• High capacity on board flash memory
• Power loss will not erase memory
• Log Reader software allows data download to PC with USB cable p/n 270A-13020


美国德纳科Dynalco控制仪表公司简介
美国德纳科Dynalco公司设计和制造高度工程坚固，可靠的，第三方的监测，控制和往复式发动机，蒸汽涡轮机，燃气涡轮机，泵和输送系统的保护认证仪表。我们为一个在石油和天然气，化工/过程，建筑业及越野设备，交通运输，发电，船舶，采矿，水和废水市场的客户和工厂自动化等。Dynalco designs and manufactures highly engineered rugged, reliable, 3rd party certified instumentation for monitoring, control and protection of reciprocating engines, steam turbines, gas turbines, pumps and conveying systems. We serve a variety of customers in the Oil and Gas, Chemical/Process, Contruction and off-road equipment, Transportation, Power Generation, Marine, Mining, Water and Waste Water and Factory Automation Markets. 

Dynalco 1968年创立，有三种产品，以及为石油和天然气工业生产工程解决方案的目标。自那以后的47年里，Dynalco已经成为世界范围内的工业领袖，因其在石油和天然气、化学、电力、海洋和建筑行业使用的高质量的仪器和控制而得到认可。Dynalco was started in 1968, with three products and a goal of producing engineered solutions for the oil and gas industries. In the 47 years since, Dynalco has become a worldwide industry leader, recognized for its high-quality instruments and controls used in the oil & gas, chemical, power, marine and construction industries.

 

- Dynalco Products

MTH-103E Tachometer / Hourmeter / Overspeed Trip 
UM-200 Tachometer / Hourmeter / Monitor 
Catalyst Monitor 
UM-600 Universal MonitorInstruments & Controls for Rotating Equipment in 
Demanding Applications 
Recently Updated Products M928-24 Magnetic Pickup/Speed Sensor 
MTH-103D Tachometer / Hourmeter / Overspeed Trip 
SST-2400H Speed Switch/Transmitter 
SWTD-1000 Speed Switch/Transmitter
LMD-120A Panel Meter 
LMD-120D Panel Meter
DPM-105 Panel Meter 
UM-600 Universal Monitor

Engine Controls & Emissions Controls 
Instruments/Gauges/Meters 
- General Purpose Gauges/Meters 
- Hourmeters 
- Tachometers 
- Temperature Gauges/Meters 
- Universal Scanner Magnetic Pickups/Speed Sensors 
- Active (Powered) 
- Cable Assemblies 
- Extra Long Reach 
- Hazardous Area 
- Intrinsically Safe Barriers 
- Miniature 
- Power Source 
- Standard Power Generation 
Dynalco Speed Switches & Speed Transmitters 
- DIN Rail and DIN Standard Series 
- SST Series



- Dynalco Tachometer转速表


Dynalco Tachometers转速表型号

CRT-9x - Replacement Tachometers;The CRT-9X replaces Caterpillar tachometers: CAT-9X114, CAT-9X116, and CAT-9X117. SPD-100 ; SPD-100L ; SPD-108 ; SPD-108L; MTH-103D; F-16; DS-800; DS-900; SPD-700; SPD-708; LST-100; LST-100L; LST-108; LST-100; LST-108L; DST-2000C; PG-100; TT-1; TT-100；DPM-105，LMD-120A，LMD-120，LMD-120D，G-101。

 

Dynalco Speed Switch 速度开关型号

SST-2000A；SST-2000H ；SST-2000A/H；SST-2200A；SST-2400A；SST-2200H；SST-2400H；SW-200B；SW-50；PNT-202

DYNALCO SST-2000 Series Speed Switches/ Transmitters Product
SST-2000A Speed Transmitter
SST-2000H Speed Transmitter
SST-2200A Speed Switch/Transmitter
SST-2200H Speed Switch/Transmitter
SST-2400A Speed Switch/Transmitter
SST-2400H Speed Switch/Transmitter

 
Dynalco Pickup Sensor传感器型号

M104; M202; M208，M101 ，M102 ，M131，M133 ，M142 ，M151 ，M155 ，M168 ，M183 ，M184，M189 ，M343 ，M801 ，M802 ，M928 ，M137 ，M138 ，M143 ，M104，M134 ，M135 ，M139， M140，M180 Magnetic Pickup/Speed Sensor ，M201 ，M202 ，M203 ，M204 Magnetic Pickup Speed Sensor，M205 ，M219 ，M231 ，M233，M318 ，M319 Magnetic Pickup/Speed Sensor，M107 ，M207 ，M208 ，C101-10 ，C910-10 ，C917-10 ，HTM-801； M806 Hall Effect Magnetic Pickup/Speed Sensor ; M951 Hall Effect Magnetic Pickup/Speed Sensor 。 
Dynalco temperature indicator温度指示仪型号:TMP-100 ; STM-110-11；STM-110-13 ; STM-110-14 ; TID-110; TMP-900。